2009.09.29 12:08
Somervell Guitars ?
(*.58.33.131) 조회 수 6950 댓글 3
웹서핑 중에 Doug Somervell 이라는 제작가의 기타를 보았습니다.
이 제작가에 대한 정보나, 아래 페이지에 올려진 사진들에 대하여
어떻게 생각하시는지 궁금하네요.
제작가의 인지도나 그 작품들은 어떻게 평가되고 있는지
궁금해서 찾아보았는데, 딱히 정보가 없네요.
http://www.facebook.com/album.php?aid=139666&id=664138102&l=e1d31863af
좋은 자재를 썼다는 것 정도 느껴지는데 마감상태는 그리 좋아보이지 않군요.
브라질리안 규격 나오는게 없었는지 후판이 4pc구요.
가격정도도 알 수가 없고... 흠
Finally compete, this guitar was begun in 2000 and the label dates it as a 2008. The top is "German Spruce" with some grain figures known as Bear Claw. It is a very attractive spruce top with some nice color variations, the tight grain is remarkably even across the entire width. The back, sides, bridge, and head veneers are all from the same board of Brazilian Rosewood that my departed friend Ralph Vaughn gave to me for helping him move in the late 80's. He said it had been given to him by a friend 20 years prior to that. It is the very epitome of Brazilian Rosewood. Since this board was narrow the back is 4 pieces book matched on the center and flipped and matched on the outside. I bound this guitar with Curly Koa left over from a project for Paul Wilson several years ago. It's a striking yet very pleasing contrast and the curl just shimmers in the light helping to making this one of, if not my most, attractive guitars ever. The Neck is ribbon stripe Mahogany, perfectly quarter sawn, carbon fiber reinforcement rods for strength and a higher resonant frequency response . The head is attached with the "arrowhead" joint; but pointing in the opposite direction from the way Hauser did his. The fingerboard is top grade, jet black ebony with a high 'c' extension and it's bound in Koa with abalone side position markers at 5, 7 and 9. The sound hole rosette is of German origin as are the purflings. The bridge tie block is Elephant Ivory, Curly Koa and purflings to match the bindings. The scalloped nut and the saddle are pre-ban documented Elephant Ivory.
The bracing pattern is a variation of a 7 fan Torres bracing system with a diagonal bar on the treble side and I have also incorporated some graphite reinforcement bracing in critical areas to increase stiffness and keep weight low. The bridge plate is cedar and tapers all the way out to the sides of the guitar.
Scale length is 660 millimeters. 54mm width at the nut. 2 1/4" string spacing at the bridge.
The tuning machines are temporary. I want the final customer to have a say in what tuners are purchased and that may have an affect on the final sale price. The pㅇst spacing is the standard 35mm. There are many excellent tuners available today and prices vary widely.
이 제작가에 대한 정보나, 아래 페이지에 올려진 사진들에 대하여
어떻게 생각하시는지 궁금하네요.
제작가의 인지도나 그 작품들은 어떻게 평가되고 있는지
궁금해서 찾아보았는데, 딱히 정보가 없네요.
http://www.facebook.com/album.php?aid=139666&id=664138102&l=e1d31863af
좋은 자재를 썼다는 것 정도 느껴지는데 마감상태는 그리 좋아보이지 않군요.
브라질리안 규격 나오는게 없었는지 후판이 4pc구요.
가격정도도 알 수가 없고... 흠
Finally compete, this guitar was begun in 2000 and the label dates it as a 2008. The top is "German Spruce" with some grain figures known as Bear Claw. It is a very attractive spruce top with some nice color variations, the tight grain is remarkably even across the entire width. The back, sides, bridge, and head veneers are all from the same board of Brazilian Rosewood that my departed friend Ralph Vaughn gave to me for helping him move in the late 80's. He said it had been given to him by a friend 20 years prior to that. It is the very epitome of Brazilian Rosewood. Since this board was narrow the back is 4 pieces book matched on the center and flipped and matched on the outside. I bound this guitar with Curly Koa left over from a project for Paul Wilson several years ago. It's a striking yet very pleasing contrast and the curl just shimmers in the light helping to making this one of, if not my most, attractive guitars ever. The Neck is ribbon stripe Mahogany, perfectly quarter sawn, carbon fiber reinforcement rods for strength and a higher resonant frequency response . The head is attached with the "arrowhead" joint; but pointing in the opposite direction from the way Hauser did his. The fingerboard is top grade, jet black ebony with a high 'c' extension and it's bound in Koa with abalone side position markers at 5, 7 and 9. The sound hole rosette is of German origin as are the purflings. The bridge tie block is Elephant Ivory, Curly Koa and purflings to match the bindings. The scalloped nut and the saddle are pre-ban documented Elephant Ivory.
The bracing pattern is a variation of a 7 fan Torres bracing system with a diagonal bar on the treble side and I have also incorporated some graphite reinforcement bracing in critical areas to increase stiffness and keep weight low. The bridge plate is cedar and tapers all the way out to the sides of the guitar.
Scale length is 660 millimeters. 54mm width at the nut. 2 1/4" string spacing at the bridge.
The tuning machines are temporary. I want the final customer to have a say in what tuners are purchased and that may have an affect on the final sale price. The pㅇst spacing is the standard 35mm. There are many excellent tuners available today and prices vary widely.
Comment '3'
-
글쓴이의 의도는 알수 없지만 최동수 선생님의 댓들을 보니
왜저런 기타를 만드는지 ..
참 이상한사람이 많습니다.
재료가 소리를 만드는것이 아닐지언데 -
윗분 무슨 말씀을 하시는건지.. 물론 재료가 좋다고 무조껀 소리가 좋은건 아니지만,
기본적으로 재료가 되어야지 어느정도 소리가 나오는거 아닌가요..?
그럼 합판기타랑 원목기타랑 다를게 없겠네요. 재료가 소리를 만드는게 아니라면...
그렇다면 유명기타제작자들은 왜 좋은 재료만을 고집할까요 ..?
기존의 사람들이 하지 않은 창의적인 제작인데 이상한사람이라고 표현하다니 진짜 이상하신분이네요.
다수나 일반적인 것과 다르면 이상하다고 생각하는 래디컬한 사고는 나쁜 것이니 고쳐야합니다.
번호 | 제목 | 글쓴이 | 날짜 | 조회 수 |
---|---|---|---|---|
1721 | matthias damman [2] 4 | 방 | 2002.10.14 | 4977 |
1720 | - 7현기타 업네크 | 오모씨 | 2005.01.31 | 6630 |
1719 | 로제트는.. 어떻게 만드는거에요? | 아따보이 | 2002.07.13 | 4785 |
1718 | 명기들이 많은 ......우에노역 근처의 aura 5 | 수 | 2004.10.11 | 6409 |
1717 | - 7현기타 뒷모습 | 오모씨 | 2005.01.31 | 6744 |
1716 | Agustin Barrios' original guitar (1914) 7 | 고정석 | 2011.10.25 | 13213 |
1715 | Bernhard Kresse | 수 | 2000.10.23 | 4111 |
1714 | French Polishing(번역본) -- 전부 번역되면 수정하겠습니다. | 고정석 | 2002.07.26 | 6901 |
1713 | José Romanillos SP/IN (Classical) | 고정석 | 2002.10.19 | 5423 |
1712 | 마르비 사진 1 1 | Limpman | 2005.12.08 | 6034 |
1711 | 바리오스의 기타? 2 | 웅수 | 2000.07.16 | 5548 |
1710 | 바리오스의 기타? 2 | 웅수 | 2000.07.16 | 5426 |
1709 | 수님 보세요 | 이재화 | 2001.02.17 | 3893 |
1708 | 수님............ | 이재화 | 2001.02.28 | 3925 |
1707 | 싸즈(saz) 의sound hole(울림구멍) 1 | chokukkon | 2010.03.11 | 10794 |
1706 | 역시 기타를 칠려면 손가락이 가늘고 길어야 ㅠㅠ | 기타는멋쟁이 | 2006.01.18 | 5649 |
1705 | 이런 기타 이름을 뭐라해야.... ? 13 | 콩쥐 | 2008.09.07 | 9084 |
1704 | 전설적인 명기 | 수 | 2003.07.11 | 5902 |
1703 | 칠이넘 어려워......... | 이재화 | 2001.02.16 | 4189 |
1702 | 하카란다 에 대한 혼동 ? 19 | esteban | 2006.03.06 | 7589 |
1701 | ##이렇게 한 번 해보세요^^... | 박성운 | 2000.12.16 | 5024 |
1700 | 뭰히 길들이기 II 1 | 산넘 | 2001.10.09 | 4328 |
1699 | 뭰히 길들이기... 6 | 산넘 | 2001.09.12 | 5129 |
1698 | '라이징 보드'와 '노말 보드'의 차이점 5 | 로망스 | 2006.02.28 | 7363 |
1697 | '사바레즈 '의 특징은 뭐예요? 4 | 진 | 2001.05.31 | 5451 |
1696 | (현장길이, 장력, 왼손)과 이에 따른 오른손의 견해 4 | 우 | 2004.02.16 | 6360 |
1695 | - 7현기타 브릿지 | 오모씨 | 2005.01.31 | 6040 |
1694 | - 7현기타 사운드홀과 라벨 8 | 오모씨 | 2005.01.31 | 6789 |
1693 | - 7현기타 앞모습 | 오모씨 | 2005.01.31 | 7010 |
1692 | - 7현기타 포지션마크 | 오모씨 | 2005.01.31 | 7132 |
1691 | -- 뒷판 굽(heel)부분 1 | 오모씨 | 2004.02.15 | 5895 |
1690 | -- 뒷판 하까란다~ 4 | 오모씨 | 2004.02.15 | 6445 |
1689 | -- 라벨 -- 10 | 오모씨 | 2004.02.15 | 6223 |
1688 | -- 로제트 2 | 오모씨 | 2004.02.15 | 6503 |
1687 | -- 몸통 자세히 4 | 오모씨 | 2004.02.15 | 6891 |
1686 | -- 브릿지~ 3 | 오모씨 | 2004.02.15 | 6398 |
1685 | -- 암레스트래요~ 2 | 오모씨 | 2004.02.15 | 6432 |
1684 | -- 어쿠스틱포트 1 2 | 오모씨 | 2004.02.15 | 5897 |
1683 | -- 어쿠스틱포트 2 / 라이징 보드 | 오모씨 | 2004.02.15 | 6524 |
1682 | -- 헤드에요~ 2 | 오모씨 | 2004.02.15 | 5788 |
1681 | . 4 | 수 | 2002.07.13 | 5077 |
1680 | . 2 | 수 | 2001.12.27 | 5875 |
1679 | . | 웅수 | 2000.06.25 | 4793 |
1678 | . 1 | 수 | 2001.07.09 | 4643 |
1677 | ... | 수 | 2001.01.31 | 4632 |
1676 | 0프렛에 대해... 제로프렛??? 28 | 쏠레아 | 2008.09.12 | 11203 |
1675 | 100년된 하카란다 덩어리. 2 | 콩쥐 | 2005.09.20 | 9842 |
1674 | 10미터높이의 연주회장 천정....placio de la guitarra 2 | 수 | 2004.10.11 | 6891 |
1673 | 11현 기타의 조율...진철호님의 글에서 퍼왔습니다. 1 | 수 | 2002.03.10 | 5924 |
1672 | 120센티 갈라진 기타 | 수 | 2023.05.17 | 1354 |
1671 | 12구멍의 브릿지 | gaspar | 2000.12.27 | 4408 |
1670 | 12줄 Kali... 2 | 간절한 | 2002.07.27 | 5490 |
1669 | 12현기타 자세히보기 15 | 콩쥐 | 2009.09.30 | 11235 |
1668 | 12홀 브릿지 줄 매는 법(알마기타 펌) 2 | 그놈참 | 2004.10.07 | 7523 |
1667 | 12홀 브릿지는 장력이 센가요? 17 | 브릿지 | 2010.05.18 | 13058 |
1666 | 12홀 브릿지에 유감 있음 (-_-) 11 | audioguy | 2004.10.06 | 5996 |
1665 | 12홀 상아단추의 길버트모델브릿지 7 | sangsik | 2003.05.04 | 6914 |
1664 | 13현 기타 5 | 13s | 2009.11.13 | 7373 |
1663 | 1863 Torres Guitar played by Richard Brune 10 | 고정석 | 2009.07.11 | 7212 |
1662 | 1920년 싼또스 에르난데스 1 | 혁 | 2004.12.22 | 6884 |
1661 | 1930년 헤르만 하우져 1세 | 혁 | 2004.12.22 | 6318 |
1660 | 1962 Classical guitar by Robert Bouchet_Brompton's 경매회사 4 | guitarguitar | 2013.10.19 | 10289 |
1659 | 1965 David Rubio Julian Bream SP/BR | 고정석 | 2002.06.16 | 7389 |
1658 | 1970 Ignacio Fleta | 고정석 | 2002.06.16 | 9380 |
1657 | 1973년 Romanillos Guitar Plan | 고정석 | 2007.12.09 | 9955 |
1656 | 1년 걸려 부쉐 모델로 Gregorio 2호 완성했어요 24 | 그레고리오 | 2007.08.28 | 8135 |
1655 | 1달러짜리 기타줄 | 수 | 2023.05.17 | 1167 |
1654 | 2%님은 나머지 98%를 어따 뒀어? | sophia | 2000.08.19 | 4733 |
1653 | 2005년 5/3~5. 일본동경근처의 기타문화관에서의 기타전시회. | 수 | 2005.02.17 | 5061 |
1652 | 20년된 기타 | gdream7 | 2005.12.31 | 6343 |
1651 | 20년된 기타 | gdream7 | 2005.12.31 | 7240 |
1650 | 20년지난기타 올 쉘락칠. 1 | gdream7 | 2005.12.31 | 6353 |
1649 | 20프렛 장착 | 수 | 2023.12.01 | 641 |
1648 | 24 Strings Sympitar!!! 1 | 간절한 | 2002.07.27 | 4793 |
1647 | 2만달러짜리 담만기타 사진(앞,뒤) | 명노창 | 2000.10.23 | 7217 |
1646 | 2홀 슈퍼칩 3 | 리브라 | 2011.05.12 | 13975 |
1645 | 30분전에 준비된 소리가... | 새내기 | 2001.04.10 | 4263 |
1644 | 30분후 기타 소리가 조아지는데... | 새내기 | 2001.04.02 | 4316 |
1643 | 3번선이 얇아지면 해결? | 개팔자 | 2000.09.13 | 5172 |
1642 | 3번선이 얇아지면 해결? | 개풀 | 2000.09.13 | 4906 |
1641 | 3피스 넥 핑거보드 | 수 | 2023.01.19 | 1249 |
1640 | 42현 피카소기타 12 | Amigo | 2007.01.08 | 8563 |
1639 | 5 Famous Torres Guitars 2 | 고정석 | 2017.08.23 | 7889 |
1638 | 5 piece guitar 1 | 수 | 2023.01.27 | 1265 |
1637 | 5 PIECES TOP | 수 | 2022.09.15 | 1701 |
1636 | 50호정도의 기타를 구입하려는데 조언을 17 | 오원근 | 2001.04.18 | 4408 |
1635 | 5벌 수입해서 다 뽕발났네....... | 명노창 | 2000.10.08 | 4856 |
1634 | 5피스 기타 | 수 | 2023.11.22 | 683 |
1633 | 630mm 기타에 관한 이야기(번역) 5 | gaspar | 2004.01.09 | 10433 |
1632 | 635 사이즈도 좋아요 | 수 | 2023.06.12 | 995 |
1631 | 6번현보다 5번현 소리가 특히 큰데....~ 3 | 으랏차차 | 2002.03.27 | 5011 |
1630 | 6현기타가 10현기타로... 1 | 콩쥐 | 2009.09.08 | 7161 |
1629 | 71번글. 글쎄요? 과연 그럴까요? | 개풀 | 2000.08.17 | 4158 |
1628 | 7현 기타~ 12 | 오모씨 | 2004.01.12 | 6417 |
1627 | 7현기타 4 | 수 | 2020.07.09 | 3617 |
1626 | 7현기타 | 수 | 2023.06.14 | 1079 |
1625 | 7현기타 옆구리 5 | 오모씨 | 2005.01.31 | 7318 |
1624 | 8-stringed guitar.....brahms guitar. | 수 | 2000.08.28 | 41223 |
1623 | 8현기타 | 수 | 2022.05.09 | 2190 |
1622 | 8현기타 오래만에보니 | 수 | 2021.10.20 | 3081 |
Designed by sketchbooks.co.kr / sketchbook5 board skin
Sketchbook5, 스케치북5
Sketchbook5, 스케치북5
Sketchbook5, 스케치북5
Sketchbook5, 스케치북5
전혀 알지 못하므로, 나름대로 개인적인 관찰소견만 말씀드리렵니다.
이분은 팔기는 하지만 취미로 제작활동 하는 분 같습니다.
연구심이나 흥미가 아주 많은 분으로 좋다는 재료와 방법은 모두 적용했군요.
- 지판 양쪽에 코아목을 붙이거나, 퍼플링과 바인딩도 아쿠스틱 기타와 같은
취향의 느낌이 듭니다.
- 부챗살재료로 스프루스와 시더를 혼용하고 카본그라파이트도 붙였네요.
- 또 헤드머신은 구매자가 고르거나 사오도록 할 생각이군요.
- 무엇보다 제작기간이 8년이나 경과되었는데 아직 완성이 덜 되었다는 점.
- 브릿지 마감이 깨끗지 못한 이유는 아직 마무리가 덜되어서 그럴겁니다.
- 전면판은 로세테 붙인후에야 사운드홀 위치가 잘못된 것을 발견하여 뒤집어서
다시 뚫었군요.
전면판재가 흔히 곰발바닥이라고 부르는 아름다운 재료일뿐아니라,
나이테가 중앙에서 주변까지 일률적으로 균일하게 촘촘한 아주 좋은 재료라
아까워서 그랬으리라 이해합니다.
- 뒷판재는 통목을 네쪽으로 갈라내어 북매치형식으로 무늬를 맞췄군요.
측후판재 뿐아니라 헤드플레이트와 브릿지까지 한나무에서 잘라낸겁니다.
재료가 아주 우수하고 마음에 들기에 네쪽을 이어붙여 만든듯 합니다.
악기재료는 미학적인 조화도 중요하지만, DNA가 같을수록 공명이 잘되겠죠.
명장 토레스는 뒷판뿐 아니라 전면판도 네쪽을 이어서 만든 명기가 있습니다.
만약 재료가 너무나 좋은거라면 당연히 이어서라도 사용해야 되겠지요.
근래에도 오래된 가구를 해체하여 나온 재료의 폭이 부족하면 몇쪽을 이어붙이는
사례는 많이 있습니다.
고 엄상옥님의 유명한 남대문기타도 전면판이 네쪽으로 이루어져 있습니다.
참고로 이번 대전기타페스티벌에서 200년된 하카란다로 만든 마감도 깔금한
외국기타를 봤는데 소리가 꼭