2009.09.29 12:08
Somervell Guitars ?
(*.58.33.131) 조회 수 7348 댓글 3
웹서핑 중에 Doug Somervell 이라는 제작가의 기타를 보았습니다.
이 제작가에 대한 정보나, 아래 페이지에 올려진 사진들에 대하여
어떻게 생각하시는지 궁금하네요.
제작가의 인지도나 그 작품들은 어떻게 평가되고 있는지
궁금해서 찾아보았는데, 딱히 정보가 없네요.
http://www.facebook.com/album.php?aid=139666&id=664138102&l=e1d31863af
좋은 자재를 썼다는 것 정도 느껴지는데 마감상태는 그리 좋아보이지 않군요.
브라질리안 규격 나오는게 없었는지 후판이 4pc구요.
가격정도도 알 수가 없고... 흠
Finally compete, this guitar was begun in 2000 and the label dates it as a 2008. The top is "German Spruce" with some grain figures known as Bear Claw. It is a very attractive spruce top with some nice color variations, the tight grain is remarkably even across the entire width. The back, sides, bridge, and head veneers are all from the same board of Brazilian Rosewood that my departed friend Ralph Vaughn gave to me for helping him move in the late 80's. He said it had been given to him by a friend 20 years prior to that. It is the very epitome of Brazilian Rosewood. Since this board was narrow the back is 4 pieces book matched on the center and flipped and matched on the outside. I bound this guitar with Curly Koa left over from a project for Paul Wilson several years ago. It's a striking yet very pleasing contrast and the curl just shimmers in the light helping to making this one of, if not my most, attractive guitars ever. The Neck is ribbon stripe Mahogany, perfectly quarter sawn, carbon fiber reinforcement rods for strength and a higher resonant frequency response . The head is attached with the "arrowhead" joint; but pointing in the opposite direction from the way Hauser did his. The fingerboard is top grade, jet black ebony with a high 'c' extension and it's bound in Koa with abalone side position markers at 5, 7 and 9. The sound hole rosette is of German origin as are the purflings. The bridge tie block is Elephant Ivory, Curly Koa and purflings to match the bindings. The scalloped nut and the saddle are pre-ban documented Elephant Ivory.
The bracing pattern is a variation of a 7 fan Torres bracing system with a diagonal bar on the treble side and I have also incorporated some graphite reinforcement bracing in critical areas to increase stiffness and keep weight low. The bridge plate is cedar and tapers all the way out to the sides of the guitar.
Scale length is 660 millimeters. 54mm width at the nut. 2 1/4" string spacing at the bridge.
The tuning machines are temporary. I want the final customer to have a say in what tuners are purchased and that may have an affect on the final sale price. The pㅇst spacing is the standard 35mm. There are many excellent tuners available today and prices vary widely.
이 제작가에 대한 정보나, 아래 페이지에 올려진 사진들에 대하여
어떻게 생각하시는지 궁금하네요.
제작가의 인지도나 그 작품들은 어떻게 평가되고 있는지
궁금해서 찾아보았는데, 딱히 정보가 없네요.
http://www.facebook.com/album.php?aid=139666&id=664138102&l=e1d31863af
좋은 자재를 썼다는 것 정도 느껴지는데 마감상태는 그리 좋아보이지 않군요.
브라질리안 규격 나오는게 없었는지 후판이 4pc구요.
가격정도도 알 수가 없고... 흠
Finally compete, this guitar was begun in 2000 and the label dates it as a 2008. The top is "German Spruce" with some grain figures known as Bear Claw. It is a very attractive spruce top with some nice color variations, the tight grain is remarkably even across the entire width. The back, sides, bridge, and head veneers are all from the same board of Brazilian Rosewood that my departed friend Ralph Vaughn gave to me for helping him move in the late 80's. He said it had been given to him by a friend 20 years prior to that. It is the very epitome of Brazilian Rosewood. Since this board was narrow the back is 4 pieces book matched on the center and flipped and matched on the outside. I bound this guitar with Curly Koa left over from a project for Paul Wilson several years ago. It's a striking yet very pleasing contrast and the curl just shimmers in the light helping to making this one of, if not my most, attractive guitars ever. The Neck is ribbon stripe Mahogany, perfectly quarter sawn, carbon fiber reinforcement rods for strength and a higher resonant frequency response . The head is attached with the "arrowhead" joint; but pointing in the opposite direction from the way Hauser did his. The fingerboard is top grade, jet black ebony with a high 'c' extension and it's bound in Koa with abalone side position markers at 5, 7 and 9. The sound hole rosette is of German origin as are the purflings. The bridge tie block is Elephant Ivory, Curly Koa and purflings to match the bindings. The scalloped nut and the saddle are pre-ban documented Elephant Ivory.
The bracing pattern is a variation of a 7 fan Torres bracing system with a diagonal bar on the treble side and I have also incorporated some graphite reinforcement bracing in critical areas to increase stiffness and keep weight low. The bridge plate is cedar and tapers all the way out to the sides of the guitar.
Scale length is 660 millimeters. 54mm width at the nut. 2 1/4" string spacing at the bridge.
The tuning machines are temporary. I want the final customer to have a say in what tuners are purchased and that may have an affect on the final sale price. The pㅇst spacing is the standard 35mm. There are many excellent tuners available today and prices vary widely.
Comment '3'
-
글쓴이의 의도는 알수 없지만 최동수 선생님의 댓들을 보니
왜저런 기타를 만드는지 ..
참 이상한사람이 많습니다.
재료가 소리를 만드는것이 아닐지언데 -
윗분 무슨 말씀을 하시는건지.. 물론 재료가 좋다고 무조껀 소리가 좋은건 아니지만,
기본적으로 재료가 되어야지 어느정도 소리가 나오는거 아닌가요..?
그럼 합판기타랑 원목기타랑 다를게 없겠네요. 재료가 소리를 만드는게 아니라면...
그렇다면 유명기타제작자들은 왜 좋은 재료만을 고집할까요 ..?
기존의 사람들이 하지 않은 창의적인 제작인데 이상한사람이라고 표현하다니 진짜 이상하신분이네요.
다수나 일반적인 것과 다르면 이상하다고 생각하는 래디컬한 사고는 나쁜 것이니 고쳐야합니다.
-
[re] 구로사와.............고악기
Date2004.10.11 By수 Views5996 -
미야모도 김빠지........현악기제작자의 기타.(1937년작)
Date2004.10.08 By수 Views7272 -
[re] 헤드
Date2004.10.08 By수 Views5589 -
[re] 헤드정면
Date2004.10.08 By수 Views4969 -
[re] 앞판
Date2004.10.08 By수 Views5314 -
[re] 넥과 옆판
Date2004.10.08 By수 Views5443 -
[re] 뒤판
Date2004.10.08 By수 Views5035 -
12홀 브릿지 줄 매는 법(알마기타 펌)
Date2004.10.07 By그놈참 Views7909 -
12홀 브릿지에 유감 있음 (-_-)
Date2004.10.06 Byaudioguy Views6328 -
audioguy님 이렇게 해보셔여~~^^
Date2004.10.07 By혁 Views5739 -
audioguy님 이렇게 해보셔여~~^^ 2
Date2004.10.07 By혁 Views5638 -
황동 하현주
Date2004.09.19 By우파사 Views7967 -
다다리오 현 사용하시는 분들에게 질문드려요
Date2004.09.06 Bypourquoi? Views5818 -
하까란다가 꽃피었네여.
Date2004.09.01 By*라질 Views8600 -
French Polishing - 쉘락칠
Date2004.08.17 By고정석 Views7895 -
기타현 가격표.
Date2004.08.01 By수 Views7028 -
기타 제작에 관하여
Date2004.07.26 By기타줄 Views4808 -
기타줄 소리에 대한 단상
Date2004.07.25 By기타줄 Views6441 -
소르와 아구아도???
Date2004.07.14 By궁금 Views5461 -
으하하하 기타 새로 샀는데요 정말 좋아미치겠어요
Date2004.07.12 By송호연 Views6159 -
기타에서
Date2004.06.16 By궁금 Views4505 -
Greg Byers와 Paul Jacobson의 정확한 조율을 위한 해결책
Date2004.06.07 By최창호 Views5593 -
기타줄 비교
Date2004.06.02 By최창호 Views9273 -
라이징보드 사용 소감을 듣고싶습니다..
Date2004.05.23 By김상국 Views5420 -
제도로 프렛 계산해내기...
Date2004.05.22 By토토 Views5455 -
최고의 튜닝머신들..
Date2004.05.11 By그놈참 Views6159 -
기타 제작에서 가장 어려운 일은 무엇인가요?
Date2004.05.01 Byaudioguy Views5397 -
뭘까요..^^ 제기타 헤드
Date2004.04.28 By기타 Views6397 -
[re] 뭘까요..^^ 제기타 로제트 지판
Date2004.04.28 By기타 Views5250 -
[re] 뭘까요..^^ 제기타 뒷판
Date2004.04.28 By기타 Views4776 -
[질문] 음량증가를 위한 증폭장치
Date2004.04.24 By금모래 Views6269 -
엇..옥용수님 기타만들기입문 .....다시올려주세요.(영문번역도있었는데)
Date2004.04.22 By수 Views4864 -
기타플랜 구하는 곳
Date2004.04.21 By토토 Views5508 -
스페인 기타 제작 마스터 클래스 문의드려요
Date2004.04.20 By으니 Views4390 -
바로크기타 만들기 입문 [일본어]
Date2004.04.11 By옥용수 Views5203 -
류트만들기 입문 [일본어]
Date2004.04.11 By옥용수 Views6040 -
기타케이스 만들기 [일본어]
Date2004.04.11 By옥용수 Views7102 -
거트현 만드는 과정 [일본어]
Date2004.04.11 By옥용수 Views4876 -
다양한 기타 & 망가진 부위에 따른 수선과정. [일본어]
Date2004.04.11 By옥용수 Views4805 -
기타의 음량증가를 위한 증폭장치...........데스데리님의 글을 퍼왔습니다.
Date2004.04.11 By수 Views5609 -
하까란다 이야기...
Date2004.04.06 By혁 Views7662 -
가까이서본 하까란다..
Date2004.04.06 By혁 Views5484 -
조앙과 함께 비교한 4대의 기타..
Date2004.04.07 By혁 Views6556 -
기타가 다른악기에 비하여 비싸다는......
Date2004.04.02 By김키타 Views6303 -
두랄루민 보강넥에 대해
Date2004.03.13 By질문드립니다. Views6592 -
[알림] 프렛계산 페이지
Date2004.03.07 By옥용수 Views4826 -
[re] [알림] 프렛계산 페이지
Date2004.03.08 Bybluejay Views5136 -
[질문]외국 나갈때 기타 가지고 가는 법.
Date2004.03.05 By경호 Views6507 -
기타프렛에 관해 여쭙겠사옵니다.
Date2004.02.26 By연리지 Views5365 -
상현주와 하현주의 재질.....
Date2004.02.28 By상아 Views6337 -
입이 큰 기타
Date2004.03.05 By기타에 미친 사람 Views6380 -
기타매냐를 들르는 모든 사람들에게..
Date2004.03.01 By기타는내친구 Views4786 -
스몰맨으로 연주된 음악
Date2004.02.27 By스몰맨 Views6455 -
투넥기타...^^;
Date2004.02.27 Byz커피 Views8590 -
(현장길이, 장력, 왼손)과 이에 따른 오른손의 견해
Date2004.02.16 By우 Views6678 -
브라만 15번 조각사진 모음~~
Date2004.02.15 By오모씨 Views7139 -
혁님의 악기 ----브라만 15번 -
Date2004.02.15 By오모씨 Views9649 -
-- 몸통 자세히
Date2004.02.15 By오모씨 Views7157 -
-- 로제트
Date2004.02.15 By오모씨 Views6855 -
-- 라벨 --
Date2004.02.15 By오모씨 Views6558 -
-- 브릿지~
Date2004.02.15 By오모씨 Views6645 -
-- 헤드에요~
Date2004.02.15 By오모씨 Views6065 -
-- 암레스트래요~
Date2004.02.15 By오모씨 Views6756 -
-- 어쿠스틱포트 1
Date2004.02.15 By오모씨 Views6207 -
-- 어쿠스틱포트 2 / 라이징 보드
Date2004.02.15 By오모씨 Views6876 -
-- 뒷판 하까란다~
Date2004.02.15 By오모씨 Views6747 -
-- 뒷판 굽(heel)부분
Date2004.02.15 By오모씨 Views6230 -
모양은 이쁜데 소리도 이쁠지 궁금하네요.
Date2004.02.15 By... Views5319 -
기타보관 시 적정온도는 어떻게 되나요?
Date2004.02.10 By초보 Views6444 -
기타조율에 대한 여러분의 경험과 의견을 듣고 싶어요 ^.^
Date2004.02.08 By백철진 Views6020 -
[re] 기타조율에 대한 여러분의 경험과 의견을 듣고 싶어요 ^.^
Date2004.02.17 Bybluejay Views6440 -
기타줄의 장력...무게 입니다..
Date2004.01.27 By기타매냥 Views7216 -
친구네 집에서 업어온 기타
Date2004.01.26 By쉑 Views8667 -
[re] 친구네 집에서 업어온 기타
Date2004.01.26 By쉑 Views5713 -
[re] 친구네 집에서 업어온 기타
Date2004.01.26 By쉑 Views4453 -
[re] 친구네 집에서 업어온 기타
Date2004.01.26 By쉑 Views4712 -
[re] 친구네 집에서 업어온 기타
Date2004.01.31 By쿠쿠다스 Views4464 -
[re] 친구네 집에서 업어온 기타2
Date2004.01.26 By쉑 Views4729 -
기타의 진한 향..어디서나는걸가요?
Date2004.01.24 By띠용 Views6064 -
7현 기타~
Date2004.01.12 By오모씨 Views6692 -
제 기타 사진이네요. 제작자를 맞추어 BoA요~
Date2004.01.11 By양 Views6223 -
[re] 제 기타 사진이네요. 제작자를 맞추어 BoA요~
Date2004.01.11 By양 Views5713 -
[re] 제 기타 사진이네요. 제작자를 맞추어 BoA요~
Date2004.01.11 By양 Views4901 -
[re] 제 기타 사진이네요. 제작자를 맞추어 BoA요~
Date2004.01.11 By양 Views4787 -
[re] 제 기타 사진이네요. 제작자를 맞추어 BoA요~
Date2004.01.11 By양 Views4786 -
[re] 제 기타 사진이네요. 제작자를 맞추어 BoA요~
Date2004.01.11 By양 Views5504 -
저의 기타 사진입니다. Brahmam 2003년 (넘버10번 , 624mm)
Date2004.01.09 By고정석 Views7161 -
[re] 저의 기타 사진입니다. Brahmam 2003년 (넘버10, 624mm)
Date2004.01.10 By고정석 Views6161 -
[re] 저의 기타 사진입니다. Brahmam 2003년 (넘버10, 624mm)
Date2004.01.10 By고정석 Views5256 -
[re] 저의 기타 사진입니다. Brahmam 2003년 (넘버10, 624mm)
Date2004.01.09 By고정석 Views5217 -
[re] 저의 기타 사진입니다. Brahmam 2003년 (넘버10, 624mm)
Date2004.01.09 By고정석 Views4893 -
[re] 저의 기타 사진입니다. Brahmam 2003년 (넘버10, 624mm)
Date2004.01.09 By고정석 Views6195 -
저의 기타 사진입니다. Corbellari 1997년 현장 640mm
Date2004.01.09 By고정석 Views6425 -
[re] 저의 기타 사진입니다. Corbellari 1997년 현장 640mm
Date2004.01.09 By고정석 Views5989 -
630mm 기타에 관한 이야기(번역)
Date2004.01.09 Bygaspar Views10788 -
서대영님 공방에서 기타를 하나 들고와서...
Date2003.12.28 By소리난다 Views7302 -
손에 맞는 기타
Date2003.12.22 By고정석 Views6783 -
합주에 필요한 기타현정보가 많은 리여석기타합주단홈페이지.
Date2003.12.16 By수 Views5545 -
orpharion 사진입니다.
Date2003.12.12 By학생 Views5759 -
줄의 장력이 세게 느껴져요!!
Date2003.12.12 By기타넘조아 Views5426
Designed by sketchbooks.co.kr / sketchbook5 board skin
Sketchbook5, 스케치북5
Sketchbook5, 스케치북5
Sketchbook5, 스케치북5
Sketchbook5, 스케치북5
전혀 알지 못하므로, 나름대로 개인적인 관찰소견만 말씀드리렵니다.
이분은 팔기는 하지만 취미로 제작활동 하는 분 같습니다.
연구심이나 흥미가 아주 많은 분으로 좋다는 재료와 방법은 모두 적용했군요.
- 지판 양쪽에 코아목을 붙이거나, 퍼플링과 바인딩도 아쿠스틱 기타와 같은
취향의 느낌이 듭니다.
- 부챗살재료로 스프루스와 시더를 혼용하고 카본그라파이트도 붙였네요.
- 또 헤드머신은 구매자가 고르거나 사오도록 할 생각이군요.
- 무엇보다 제작기간이 8년이나 경과되었는데 아직 완성이 덜 되었다는 점.
- 브릿지 마감이 깨끗지 못한 이유는 아직 마무리가 덜되어서 그럴겁니다.
- 전면판은 로세테 붙인후에야 사운드홀 위치가 잘못된 것을 발견하여 뒤집어서
다시 뚫었군요.
전면판재가 흔히 곰발바닥이라고 부르는 아름다운 재료일뿐아니라,
나이테가 중앙에서 주변까지 일률적으로 균일하게 촘촘한 아주 좋은 재료라
아까워서 그랬으리라 이해합니다.
- 뒷판재는 통목을 네쪽으로 갈라내어 북매치형식으로 무늬를 맞췄군요.
측후판재 뿐아니라 헤드플레이트와 브릿지까지 한나무에서 잘라낸겁니다.
재료가 아주 우수하고 마음에 들기에 네쪽을 이어붙여 만든듯 합니다.
악기재료는 미학적인 조화도 중요하지만, DNA가 같을수록 공명이 잘되겠죠.
명장 토레스는 뒷판뿐 아니라 전면판도 네쪽을 이어서 만든 명기가 있습니다.
만약 재료가 너무나 좋은거라면 당연히 이어서라도 사용해야 되겠지요.
근래에도 오래된 가구를 해체하여 나온 재료의 폭이 부족하면 몇쪽을 이어붙이는
사례는 많이 있습니다.
고 엄상옥님의 유명한 남대문기타도 전면판이 네쪽으로 이루어져 있습니다.
참고로 이번 대전기타페스티벌에서 200년된 하카란다로 만든 마감도 깔금한
외국기타를 봤는데 소리가 꼭