2009.09.29 12:08
Somervell Guitars ?
(*.58.33.131) 조회 수 7543 댓글 3
웹서핑 중에 Doug Somervell 이라는 제작가의 기타를 보았습니다.
이 제작가에 대한 정보나, 아래 페이지에 올려진 사진들에 대하여
어떻게 생각하시는지 궁금하네요.
제작가의 인지도나 그 작품들은 어떻게 평가되고 있는지
궁금해서 찾아보았는데, 딱히 정보가 없네요.
http://www.facebook.com/album.php?aid=139666&id=664138102&l=e1d31863af
좋은 자재를 썼다는 것 정도 느껴지는데 마감상태는 그리 좋아보이지 않군요.
브라질리안 규격 나오는게 없었는지 후판이 4pc구요.
가격정도도 알 수가 없고... 흠
Finally compete, this guitar was begun in 2000 and the label dates it as a 2008. The top is "German Spruce" with some grain figures known as Bear Claw. It is a very attractive spruce top with some nice color variations, the tight grain is remarkably even across the entire width. The back, sides, bridge, and head veneers are all from the same board of Brazilian Rosewood that my departed friend Ralph Vaughn gave to me for helping him move in the late 80's. He said it had been given to him by a friend 20 years prior to that. It is the very epitome of Brazilian Rosewood. Since this board was narrow the back is 4 pieces book matched on the center and flipped and matched on the outside. I bound this guitar with Curly Koa left over from a project for Paul Wilson several years ago. It's a striking yet very pleasing contrast and the curl just shimmers in the light helping to making this one of, if not my most, attractive guitars ever. The Neck is ribbon stripe Mahogany, perfectly quarter sawn, carbon fiber reinforcement rods for strength and a higher resonant frequency response . The head is attached with the "arrowhead" joint; but pointing in the opposite direction from the way Hauser did his. The fingerboard is top grade, jet black ebony with a high 'c' extension and it's bound in Koa with abalone side position markers at 5, 7 and 9. The sound hole rosette is of German origin as are the purflings. The bridge tie block is Elephant Ivory, Curly Koa and purflings to match the bindings. The scalloped nut and the saddle are pre-ban documented Elephant Ivory.
The bracing pattern is a variation of a 7 fan Torres bracing system with a diagonal bar on the treble side and I have also incorporated some graphite reinforcement bracing in critical areas to increase stiffness and keep weight low. The bridge plate is cedar and tapers all the way out to the sides of the guitar.
Scale length is 660 millimeters. 54mm width at the nut. 2 1/4" string spacing at the bridge.
The tuning machines are temporary. I want the final customer to have a say in what tuners are purchased and that may have an affect on the final sale price. The pㅇst spacing is the standard 35mm. There are many excellent tuners available today and prices vary widely.
이 제작가에 대한 정보나, 아래 페이지에 올려진 사진들에 대하여
어떻게 생각하시는지 궁금하네요.
제작가의 인지도나 그 작품들은 어떻게 평가되고 있는지
궁금해서 찾아보았는데, 딱히 정보가 없네요.
http://www.facebook.com/album.php?aid=139666&id=664138102&l=e1d31863af
좋은 자재를 썼다는 것 정도 느껴지는데 마감상태는 그리 좋아보이지 않군요.
브라질리안 규격 나오는게 없었는지 후판이 4pc구요.
가격정도도 알 수가 없고... 흠
Finally compete, this guitar was begun in 2000 and the label dates it as a 2008. The top is "German Spruce" with some grain figures known as Bear Claw. It is a very attractive spruce top with some nice color variations, the tight grain is remarkably even across the entire width. The back, sides, bridge, and head veneers are all from the same board of Brazilian Rosewood that my departed friend Ralph Vaughn gave to me for helping him move in the late 80's. He said it had been given to him by a friend 20 years prior to that. It is the very epitome of Brazilian Rosewood. Since this board was narrow the back is 4 pieces book matched on the center and flipped and matched on the outside. I bound this guitar with Curly Koa left over from a project for Paul Wilson several years ago. It's a striking yet very pleasing contrast and the curl just shimmers in the light helping to making this one of, if not my most, attractive guitars ever. The Neck is ribbon stripe Mahogany, perfectly quarter sawn, carbon fiber reinforcement rods for strength and a higher resonant frequency response . The head is attached with the "arrowhead" joint; but pointing in the opposite direction from the way Hauser did his. The fingerboard is top grade, jet black ebony with a high 'c' extension and it's bound in Koa with abalone side position markers at 5, 7 and 9. The sound hole rosette is of German origin as are the purflings. The bridge tie block is Elephant Ivory, Curly Koa and purflings to match the bindings. The scalloped nut and the saddle are pre-ban documented Elephant Ivory.
The bracing pattern is a variation of a 7 fan Torres bracing system with a diagonal bar on the treble side and I have also incorporated some graphite reinforcement bracing in critical areas to increase stiffness and keep weight low. The bridge plate is cedar and tapers all the way out to the sides of the guitar.
Scale length is 660 millimeters. 54mm width at the nut. 2 1/4" string spacing at the bridge.
The tuning machines are temporary. I want the final customer to have a say in what tuners are purchased and that may have an affect on the final sale price. The pㅇst spacing is the standard 35mm. There are many excellent tuners available today and prices vary widely.
Comment '3'
-
글쓴이의 의도는 알수 없지만 최동수 선생님의 댓들을 보니
왜저런 기타를 만드는지 ..
참 이상한사람이 많습니다.
재료가 소리를 만드는것이 아닐지언데 -
윗분 무슨 말씀을 하시는건지.. 물론 재료가 좋다고 무조껀 소리가 좋은건 아니지만,
기본적으로 재료가 되어야지 어느정도 소리가 나오는거 아닌가요..?
그럼 합판기타랑 원목기타랑 다를게 없겠네요. 재료가 소리를 만드는게 아니라면...
그렇다면 유명기타제작자들은 왜 좋은 재료만을 고집할까요 ..?
기존의 사람들이 하지 않은 창의적인 제작인데 이상한사람이라고 표현하다니 진짜 이상하신분이네요.
다수나 일반적인 것과 다르면 이상하다고 생각하는 래디컬한 사고는 나쁜 것이니 고쳐야합니다.
-
로마닐로스가 올해(2008년) 의 제작자로 선정한 David Merrin Guitar
Date2008.10.19 By고정석 Views18642 -
좀더 길은 기타줄이 없을까요?
Date2008.11.25 By자유 Views7761 -
기타제작아카데미에서 제작한 스페인식 네크의 근접사진
Date2008.11.29 By백철진 Views9788 -
하젤 스프르스 사진
Date2008.12.01 By콩쥐 Views9106 -
[re] 바이스게버 카피모델의 헤드사진
Date2008.12.11 By최동수 Views6764 -
[re] 바이스게버 카피모델의 헤드사진
Date2008.12.11 By최동수 Views7266 -
[re] Kasha model의 헤드 모양
Date2008.12.11 By최동수 Views6249 -
Kasha model의 헤드 모양
Date2008.12.11 By최동수 Views8856 -
최동수님 ......
Date2009.03.01 ByKyung Yoo Views7665 -
대중음악에서 다현 기타
Date2009.03.14 Byabcde-kld Views6513 -
다현기타 사용자분들의 경험담을 듣고 싶습니다.
Date2009.03.12 By신정하 Views10786 -
장 라리비 기타 제작 과정 홍보 영상
Date2009.03.17 Byjkfs Views9105 -
클래식기타 튜닝문제.....
Date2009.04.07 By기타맨 Views10622 -
세고비아>야마시타>앙헬
Date2009.04.26 By종이컵 Views7848 -
울프톤 이해를 돕기 위한 그림입니다 ^^
Date2009.05.12 ByEchoOff Views13958 -
독특한 기타 디자인이네요
Date2009.05.14 By바실리스크 Views11412 -
픽업
Date2009.05.22 By콩쥐 Views7597 -
기타가 제작되고나서 제 소리를 내려면, 시간이 필요한 건가요?
Date2009.05.26 By몰라용 Views8781 -
기타를 만드는 남자
Date2009.05.28 By최동수 Views13618 -
왼손편한기타
Date2009.06.01 By두식이네 Views9243 -
기타 구조해석 - 유한요소 모델
Date2009.06.11 ByEchoOff Views13149 -
기타 구조해석 - 진동 모드 1
Date2009.06.11 ByEchoOff Views11604 -
기타 구조해석 - 진동 모드 2
Date2009.06.11 ByEchoOff Views10943 -
기타 구조해석 - 현 장력에 의한 상판의 변형
Date2009.06.11 ByEchoOff Views11275 -
기타 구조해석 - animation 1
Date2009.06.11 ByEchoOff Views10572 -
기타 구조해석 - animation 2
Date2009.06.11 ByEchoOff Views9025 -
기타 구조해석 - animation 3
Date2009.06.11 ByEchoOff Views8838 -
기타 구조해석 - animation 4
Date2009.06.11 ByEchoOff Views10340 -
하드케이스 백팩
Date2009.06.15 Bymauro Views11734 -
동아리연주회곡을 정해야하는데..ㅠ..
Date2009.06.25 By동아리회장 Views7328 -
황칠나무
Date2009.06.25 By콩쥐 Views8553 -
황칠나무
Date2009.06.26 By고정석 Views20570 -
전통 천연도료 황칠의 특성과 이용 (퍼옴)
Date2009.06.27 By고정석 Views8884 -
한국내 제작되는 기타 한달 2만대.
Date2009.07.08 By콩쥐 Views8737 -
1863 Torres Guitar played by Richard Brune
Date2009.07.11 By고정석 Views7729 -
8현기타에 대해 궁금합니다
Date2009.07.29 By초보 Views8056 -
미겔로드리게즈의 그 소리는 어떤것이 가장 큰 요인일까요?
Date2009.08.29 ByL Views8637 -
6현기타가 10현기타로...
Date2009.09.08 By콩쥐 Views7621 -
습도.
Date2009.09.12 By콩쥐 Views7436 -
[re] 장력(Tension)과 액션(Action)
Date2008.08.19 By그레이칙 Views8600 -
장력(Tension)과 액션(Action)
Date2008.08.18 By쏠레아 Views16940 -
스프러스 기타와 시더 기타
Date2009.09.17 By금모래 Views19829 -
Somervell Guitars ?
Date2009.09.29 ByCollings Views7543 -
손크기에 맞는 기타 추천부탁드려요,
Date2009.10.01 By학생 Views9373 -
[re] JOSE ROMANILLOS 관련 영상 5, 6편
Date2009.10.25 Byjrg Views7678 -
JOSE ROMANILLOS 관련 영상
Date2009.10.11 Byjrg Views10821 -
고려악기에서 만든 기타라는데..
Date2009.10.12 ByThink Views12598 -
12현기타 자세히보기
Date2009.09.30 By콩쥐 Views11867 -
최동수 선생님께 질문을 올립니다....
Date2009.10.30 BySTELLO Views7678 -
13현 기타
Date2009.11.13 By13s Views7898 -
일렉트릭 클래식 기타를 구입하려고 합니다^^
Date2009.11.15 By기타매니아 Views9016 -
목공기계를 쓸때는 항상 안전하게...(퍼온글)
Date2009.11.28 By콩쥐 Views13191 -
[re] 스몰맨과 죤 윌리엄스~
Date2009.11.29 ByAcunetix Views1 -
[re] 스몰맨 격자 살모양
Date2009.11.29 By파크닝팬 Views9412 -
스몰맨과 죤 윌리엄스~
Date2009.11.28 ByJS Views13239 -
명기의 비교 감상 - 라그리마
Date2009.12.06 By파크닝팬 Views13644 -
흑단(에보니).....최동수
Date2009.12.08 By콩쥐 Views14039 -
미분음 기타를 구할수 있을까요?
Date2009.12.09 By현대음악 Views8955 -
죤 윌리엄즈의 스몰맨공방 방문
Date2009.12.13 By파크닝팬 Views12601 -
그렉 스몰맨 Greg Smallman 에게 질문 있으신 분
Date2009.12.13 By홍콩매니아 Views10103 -
가격과 소리
Date2010.01.03 By100호유저 Views18818 -
기타재료
Date2010.01.31 By콩쥐 Views9715 -
기타리스트들이 애용한 기타들
Date2010.02.02 By고정석 Views13267 -
경험으로 깨달은 장력의세기
Date2010.02.19 By블루고추 Views12252 -
[re] 헤드각과 현의 장력...실험
Date2010.02.22 By쏠레아 Views10415 -
헤드각과 현의 장력...실험
Date2010.02.20 By삭제... Views10837 -
수리, 중고, 세팅...
Date2010.02.19 By콩쥐 Views10699 -
하이텐션 줄/로우텐션 줄
Date2010.02.20 By쏠레아 Views15471 -
나일론현/스틸현
Date2010.02.22 By쏠레아 Views10972 -
[re] 기타제작가 콩쥐님 보세요.
Date2010.02.28 By저기 Views9005 -
기타제작가 콩쥐님 보세요.
Date2010.02.25 By쏠레아 Views16881 -
야마하 Grand Concert 41 모델 아시는 분 계세요?
Date2010.02.25 Byㅁㅁ Views11095 -
기타의 음량
Date2010.02.28 By쏠레아 Views13963 -
존길버트와 알마기타
Date2010.03.01 By재미난기타 Views16536 -
왜?
Date2010.03.07 By쏠레아 Views13107 -
기타의 액션
Date2010.03.08 By쏠레아 Views10343 -
Sound hole = 소리 구멍???
Date2010.03.10 By쏠레아 Views11993 -
싸즈(saz) 의sound hole(울림구멍)
Date2010.03.11 Bychokukkon Views11300 -
하현주(saddle) 미세조정
Date2010.03.15 By쏠레아 Views19661 -
쏠레아님께 질문!
Date2010.03.19 By도치 Views11467 -
[re] 현장 조정가능한 기타를 만들수 없나요
Date2010.03.24 By쏠레아 Views14448 -
[re] 현장 조정가능한 기타를 만들수 없나요
Date2010.03.27 By파크닝팬 Views11232 -
기타 목재 문의...?
Date2010.03.25 By왔다구나 Views14499 -
Fret Dressing and Set-Up for Classical guitar
Date2010.03.27 By고정석 Views10814 -
목공기계(테이블 쏘우, 기계톱)의 위험성.
Date2010.03.28 By콩쥐 Views16931 -
고수님들....새들 가공에 대해서 질문요...
Date2010.05.17 By몰디브 Views14686 -
12홀 브릿지는 장력이 센가요?
Date2010.05.18 By브릿지 Views13719 -
[re] Arm rest 구입처 문의 또는 대용품 문의
Date2010.04.23 ByRealforce Views13184 -
Arm rest 구입처 문의 또는 대용품 문의
Date2010.04.06 ByRealforce Views13452 -
일본에 유명한 명기 클래식 기타 악기샾좀 알려주세요
Date2010.08.02 By궁금이 Views15792 -
높은 프렛(지판에 박힌 쇠)을 구할 수 있나요?
Date2010.09.22 Byhighdama Views16067 -
국내외 기타 레이블 모음
Date2010.09.29 By오덕구 Views15563 -
메이플로즈 기타 만들기-1
Date2010.12.02 By최동수 Views25287 -
Wood & Pearl Guitar Rosette
Date2010.12.10 By고정석 Views12768 -
스몰맨기타 모델
Date2010.12.14 By스몰 Views17378 -
명기파는곳
Date2010.12.14 By쥐며느리 Views16480 -
포크기타 반음계
Date2011.01.22 By바람들이 Views10293 -
기타 제작용 목재와 대체목에 대해 잘 설명해 놓은 글이 있어서 링크해봅니다.
Date2011.01.31 Byhesed Views15663 -
도미니크 필드 인터뷰
Date2011.02.06 Byidf Views14074 -
Fan Frets Guitar
Date2011.02.17 By고정석 Views16056
Designed by sketchbooks.co.kr / sketchbook5 board skin
Sketchbook5, 스케치북5
Sketchbook5, 스케치북5
Sketchbook5, 스케치북5
Sketchbook5, 스케치북5
전혀 알지 못하므로, 나름대로 개인적인 관찰소견만 말씀드리렵니다.
이분은 팔기는 하지만 취미로 제작활동 하는 분 같습니다.
연구심이나 흥미가 아주 많은 분으로 좋다는 재료와 방법은 모두 적용했군요.
- 지판 양쪽에 코아목을 붙이거나, 퍼플링과 바인딩도 아쿠스틱 기타와 같은
취향의 느낌이 듭니다.
- 부챗살재료로 스프루스와 시더를 혼용하고 카본그라파이트도 붙였네요.
- 또 헤드머신은 구매자가 고르거나 사오도록 할 생각이군요.
- 무엇보다 제작기간이 8년이나 경과되었는데 아직 완성이 덜 되었다는 점.
- 브릿지 마감이 깨끗지 못한 이유는 아직 마무리가 덜되어서 그럴겁니다.
- 전면판은 로세테 붙인후에야 사운드홀 위치가 잘못된 것을 발견하여 뒤집어서
다시 뚫었군요.
전면판재가 흔히 곰발바닥이라고 부르는 아름다운 재료일뿐아니라,
나이테가 중앙에서 주변까지 일률적으로 균일하게 촘촘한 아주 좋은 재료라
아까워서 그랬으리라 이해합니다.
- 뒷판재는 통목을 네쪽으로 갈라내어 북매치형식으로 무늬를 맞췄군요.
측후판재 뿐아니라 헤드플레이트와 브릿지까지 한나무에서 잘라낸겁니다.
재료가 아주 우수하고 마음에 들기에 네쪽을 이어붙여 만든듯 합니다.
악기재료는 미학적인 조화도 중요하지만, DNA가 같을수록 공명이 잘되겠죠.
명장 토레스는 뒷판뿐 아니라 전면판도 네쪽을 이어서 만든 명기가 있습니다.
만약 재료가 너무나 좋은거라면 당연히 이어서라도 사용해야 되겠지요.
근래에도 오래된 가구를 해체하여 나온 재료의 폭이 부족하면 몇쪽을 이어붙이는
사례는 많이 있습니다.
고 엄상옥님의 유명한 남대문기타도 전면판이 네쪽으로 이루어져 있습니다.
참고로 이번 대전기타페스티벌에서 200년된 하카란다로 만든 마감도 깔금한
외국기타를 봤는데 소리가 꼭